Beam LeoTRAK RST470

The Beam LeoTRAK RST470 provides the latest technology to support GLOBAL alert, monitoring and tracking applications. RST470 has an inbuilt Iridium data module to provide communications anywhere on earth. The sensitive GPS engine, also inbuilt, provides pinpoint accuracy for Tracking & Alert applications worldwide. Tracking & Alert messages can be sent on demand or stored on the local SD card for future retrieval.

Overview

Terminal Features:

In-built Iridium 9601 Data Module
Short Burst Data communications
Sensitive In-built GPS engine
SD storage upgradeable to 4GB
Messaging Capable
Battery Back-up "Ready"
Up to 90 days sleep mode
Up to 7 days standby
Up to 6 hours continuous transmit
9 32VDC input
Intelligent power saving modes
Support multiple alert buttons
Digital IO
Analogue input
Multiple alert notifications
Support simultaneous tracking
Passcode protected
Simple Installation / configuration
Local & remote configuration
Remote diagnostics & testing
Remote Control

Tech Specs

Features:
Iridium Module

9601 L-Band transceiver frequency 1616 - 1625 MHz
Minimum Packet Size 10 bytes

GPS Module

In-built GPS Module
u-blox SuperSense LEA-4S GPS Module
Sensitivity -158 dBm

I/O Specification

Alarm Loops ( 2 Pairs ) Normally Closed
General purpose I/O ( x 2 )
Input Mode 0-35VDC tolerant (>3V = high)
Output mode O/C 100mA sink to ground
Analogue Input 0 - 5VDC range
Ignition / Acc power sense 0-35VDC tolerant (>7V=high

Battery Specification ( Optional Battery Pack )

Battery Type Li-polymer ( Varta EasyPack )
Safety voltage / temp' & short circuit protection
Capacity 15Whr
Charge time 4 to 6 hours

Power Specifications

Power input voltage DC 9 - 32VDC

Power Consumption ( WATTS )

Stand-by TBD
Transmit 2.5
Sleep Mode <3 milliwatts

Environment Specifications

Temperature Degrees �C Degrees �F
(Without Batteries) -30 to +70 -22 to +158
(With Batteries) -20 to +60 -4 to +140
Battery Charging Range 0 to +45 +32 to 113
Storage -35 to +85 -31 to 185
Humidity 85% non condensing

Certifications

IEC60945 / 2002 ( Sections 9 & 10 ) Emissions & Immunity
Electrical Safety
ROHS
EMC Compliance
C tick
CE Compliance
Iridium

Kit Contents

Main LeoTRAK Terminal
Main Power & Accessory Cable Loom
256mb SD storage card ( Sandisk )
Serial Data Cable
Configuration Software
User & Installation Manuals
CDR- User Manual, AT Command, Configuration Software

Dimensions:

Dimensions - mm 177x150x47 335x228x69

Dimensions - inches 7.0x5.9x1.8 13.2x11.3x2.7

Weight - kg 0.82 1.6

Weight - lbs 1.8 3.5

* These weights are based upon the RST480 (Including GSM & Iridium modules) Other models RST450,460,470 are less weight

Documentation

Quick Reference

Quick Start

User Manual

Accessories

Antcom Fixed Mast Antenna
The Antcom Fixed Mast Antenna is specifically designed for marine and fixed land based applications. The Helix design provides high gain performance and is very well suited for installation onto a mast or for bulk head mounting. The recommended Beam antenna cables are the RST930, RST932 and RST933.

Iridium Antcom Magnetic Mount Antenna
The Iridium Antcom Magnetic Mount Antenna provides a convenient temporary installation for transport, marine or fixed site applicatons. It comes equipped with a five meter cable and can be used with the Iridium 9505A terminal.

RST900 GPS Helix Mast Antenna
The active L1 GPS antenna is ideal for use with the Beam TrackALERT & LeoTRAK products. The high gain GPS antenna can be used for maritime, land transport and fixed site applications. Applications: Maritime Fixed Site Transport Emergency Back-up

RST901 GPS Patch Antenna
The active L1 GPS patch antenna is ideal for use with the Beam TrackALERT & LeoTRAK products. The high gain GPS antenna can be used for maritime, land transport and fixed site applications.