Beam In-Vehicle Fixed Telephone System

The Beam Fixed Satellite Telephone provides a complete hands-free voice and data satellite telephone for any transport application. The terminal can be installed so the compact user handset will be located close to the driver whilst still providing the ability to have external horn and or light alerts. Provides integrated, hands-free voice communications from fixed site applications. For example, land uses may include installations in: trucks, buses, trains, recreational, SUV's, all types of vehicles. It may also be installed as part of a tracking system for Marine application to provide Crew Calling and Captain and Crew calling from a single unit. It may be installed as part of an integrated aircraft and helicopter communications systems.

Overview

Terminal Features:

Compact intelligent handset
Sturdy hang-up cradle
Compact Installation
Convenient serial data port
Private or Hands-free mode
Echo Cancellation
Superior voice quality
10-32V DC power input
SMS / SMSMO
Tracking & Monitoring Capable
Intelligent Processor & Interface
Support external ringer/light
Auxiliary & constant power
Fully Certified
Easy to install

Network Service Features:

Global coverage pole to pole
Low cost airtime rates
No regions or zones
Crew calling service
Pre or post paid
Itemised billing
Support all data services
Support all Voice services
Support Iridium Fax terminal

Tech Specs

Features:
Power Specifications

Power input voltage 11 - 32 V DC
Power Consumption AMPS 12 V DC 24 V DC
Stand-by - inc handset 0.33 0.14
Transmit - inc handset
0.63 0.23

Environment specifications

Temperature Degrees �C Degrees �F
Operating Range -15 to +55 +5 to +131
Storage -30 to + 85 -22 to 185

Humidity

85% non condensing

Connectors / Interfaces / LEDS

Transceiver D25
Intelligent Handset RJ45 DPL BUS
Data Port RS232 Serial Interface
Speaker 3.5mm mono
Microphone 2.5mm mono
Constant power Screw connector
Auxilary power Screw connector
Horn Alert Screw connector
Audio mute Screw connector

Certifications

IEC60945
Electrical Safety
EMC Compliance
Independent Aeronautical certification MUST be gained prior to installation

Kit Contents

Iridium 9522A Transceiver module Main terminal
Hands-free & power interface
Cable assemblies: DC cables, interface cables
Mounting adhesive / velcro
Data Cable
User & Installation Manual
CD - Beam Management System, AT Commands, Manual

Dimensions:

Dimensions - inches 7.73x3.25x3.25 7.2x5.1x1.0
Dimensions - mm 196.4x82.6x39 183x130x27
Weight - lbs 1.45 0.66
Weight - kg 0.659 0.3

Documentation

Air

Land

Sea

QuickStart

User

Accessories

Antcom Fixed Mast Antenna
The Antcom Fixed Mast Antenna is specifically designed for marine and fixed land based applications. The Helix design provides high gain performance and is very well suited for installation onto a mast or for bulk head mounting. The recommended Beam antenna cables are the RST930, RST932 and RST933.

Iridium Antcom Magnetic Mount Antenna
The Iridium Antcom Magnetic Mount Antenna provides a convenient temporary installation for transport, marine or fixed site applicatons. It comes equipped with a five meter cable and can be used with the Iridium 9505A terminal.

Iridium Beam RST030 SSAS Interface Inter
The Iridium Beam RST030 TrackALERT terminal connects easily and simply to the Beam remote Satellite Terminal and provides the functionality to support an SSAS, Ship Security Alert System, along with tracking and reporting capabilities. The inbuilt GPS engine ensures that accurate reporting of a vessels location can be maintained at all times.